M-AUDIO OCTANE 8-CHANNEL DIGITAL PREAMP EN CARACAS

M-Audio Octane 8-channel Microphone/Instrument Preamp and A/D Converter with ADAT Lightpipe Expand The Use of Your DAW! The 8-channel Octane preamp from M-Audio is specifically designed to enhance the front end of any multitrack digital recording system. Its award-winning M-Audio preamp technology delivers pristine digital signals to any Lightpipe-compatible devices such as hard disk recorders and digital mixers. Octane is ideal for miking drum kits or bands-and the two mic/instrument channels are great for guitar, bass and other instruments. M-S matrix encoding found in the Octane lets you employ stereo miking techniques previously available only in pro studios. Octane even has M-Audio analog preamp (direct) outs for each channel, making it the perfect upgrade for any digital audio interface or mixer. Word clock also means that you can sync multiple Octanes for as many channels as you need as your studio grows. M-Audio Octane Features: 8 mic preamp channels, 2 w/instrument inputs 8 line inputs ADAT Lightpipe output (TOSlink) 24-bit audio resolution throughout 3-segment LEDs 20dB pad phantom power with indicator (groups 1-4, 5-8) 2 channels are mic/instr preamps (front-panel 1/4" TS) ADAT Lightpipe output (TOSlink) 24-bit audio resolution throughout selectable sample rate (44.1k and 48k) and external sync word clock I/O (75-ohm BNC) for synchronization to other digital devices line inputs are half-normalled as insert ins or standalone A/D M-S matrix encoding on channels 7 & 8 with width control phase reverse switches on even channels low-cut filter on channel 1 (-12dB/oct @ 80Hz) OVERVIEW High-octane preamplification with all the versatility you need! The M-Audio Octane 8-Channel Mic Preamp with ADAT Lightpipe adds connectivity and studio-quality preamps to your recording rig. Excellent for input-hungry miking applications. 2 mic/instrument channels provide input for guitars, basses, keyboards, and other instruments. Enables sophisticated stereo miking. Analog preamp direct outputs on every channel. ADAT lightpipe output. Word clock lets you sync multiple units. FEATURES 2 channels with mic/instrument preamps (front-panel 1/4") ADAT Lightpipe output (TOSlink) 24-bit audio resolution Selectable sample rate (44.1k and 48k) and external sync Word clock I/O (75-ohm BNC) for synchronization to other digital devices Line inputs are half-normalled as insert ins or standalone A/D M-S matrix encoding on channels 7 & 8 with width control Phase reverse switches on even channels Low-cut filter on channel 1 (-12dB/oct @ 80Hz) 8 channels, each with: XLR mic input 1/4" TRS line input 1/4" preamp out 3-segment LEDs 20dB pad Phantom power with indicator (groups 1-4, 5-8) SPECIFICATIONS Mic Inputs Variable Gain: 50dB Frequency Response: 20-20kHz, +/- 0.11dB; mid gain Signal-to-Noise Ratio: 120dB, A-weighted; mid gain Dynamic Range: 120dB, A-weighted; mid gain THD+N: 0.00041% -107dB, 1dB below clipping, 22Hz-22kHz; mid gain EIA Noise Rating: -129dBu @ max gain, 600 ohms, 22Hz-22 kHz (unweighted) Input Impedance: 2.85k ohms, no pad; 3.600k ohms, pad engaged Instrument Inputs Input Impedance: 3M ohms Variable Gain: 44dB Frequency Response: 20Hz-20kHz, +/- 0.03dB; mid gain Signal-to-Noise Ratio: 133dB, A-weighted; mid gain Dynamic Range: 133dB, A-weighted; mid gain THD+N: 0.0018% -95dB, 1 dB below clipping, 22Hz-22kHz; mid gain System Throughput Gain: 6dB to 50dB (balanced out); 0dB to 44dB (unbalanced out) Line Inputs Line Input Impedance: 20kOhms (balanced), 13.3k ohms (unbalanced) Frequency Response: 20Hz-20kHz, +/- 0.04dB Signal-to-Noise Ratio: 110dB, A-weighted Dynamic Range: 110dB, A-weighted THD+N: 0.00067% -103dB, -1dBFS, 22Hz-22kHz Additional Features Maximum Rated Analog Output (Digital Clip): +26 dBu (balanced), +20 dBu (unbalanced) Output Impedance: 600 ohms (balanced) M/S matrix: L=M+S/3 and R=M”S/3 Digital Clip Level at Line Inputs: +20dBu Channel Quasi-Peak Level Indicators: Light 3dB, 10dB and 20dB below digital clip Word Clock Range (Switchable): 44.1kHz, 48kHz and external Word Clock Slave Sync Range: 33kHz to 59kHz Word Clock Impedance: 75 ohms Power: 18 VAC (16.5 VAC minimum) @ 3.5A inline power adapter USUARIOS DE MENOS DE 200 POSITIVAS O USUARIOS NUEVOS, SOLO SE ENTREGARA Y PROBARA EN PERSONA PREVIO PAGO ENVIO Y ENTREGA: POR MRW o TEALCA UNA VEZ CONFIRMADO EL PAGO, EL PRODUCTO SERA ENVIADO EN UN PERIODO DE 2 DIAS HABILES A MAS TARDAR.EN CASO DE ENVIO EL PRODCUTO SOLO SERA ENVIADO A LA OFICINA DE MRW O TEALCA MAS CERCANA AL DOMICILIO O TRABAJO DEL COMPRADOR PARA QUE LA PASE BUSCANDO Mis Artículos a la venta